Connect using the HP bt450, Printer and PC Adapter with Bluetooth
®
Wireless
Technology
The HP bt450, Printer and PC Adapter with Bluetooth
®
Wireless Technology allows
you to print images from most Bluetooth devices to the HP All-in-One without a cable
connection. Simply insert the HP bt450 into the front USB port and print from a
Bluetooth device such as a PDA or camera phone.
Note
You can also use Bluetooth technology to print from a computer to the
HP All-in-One.
To connect the HP bt450 to the HP All-in-One
1.
Insert the HP bt450 into the front USB port (shown in the graphic below).
2.
Some Bluetooth devices exchange device addresses when they communicate
with each other and establish a connection. Also, some Bluetooth devices display
the name of the printer when connected. If you do not want the default name
displayed as the name of the HP All-in-One, you can change the device name.
Do the following, as appropriate:
To find out the device address of the HP All-in-One
a.
Press
Setup
.
b.
Press
9
, and then press
1
.
This selects
Bluetooth
and then selects
Device Address
. The
Device
Address
appears, which is read only.
c.
To enter the address into your device, follow the instructions that came with
your Bluetooth device.
To change the device name of the HP All-in-One from the default
a.
Press
Setup
.
b.
Press
9
, and then press
2
.
This selects
Bluetooth
and then selects
Device Name
.
Note
The HP All-in-One ships with the predefined name of
"Officejet 6300 Series"
.
c.
Use the keypad to enter a new name.
d.
When you have finished entering a name for the HP All-in-One, press
OK
.
Chapter 3
24
HP Officejet 6300 All-in-One series
Finish
setup
The name you entered will appear on your Bluetooth device when you
connect to the HP All-in-One to print.
3.
Press
OK
to exit the Setup menu.