Set the number of rings before answering
If you turn on the
Auto Answer
setting, you can specify how many rings should occur
before the HP All-in-One automatically answers the incoming call.
The
Rings to Answer
setting is important if you have an answering machine on the
same phone line as the HP All-in-One, because you want the answering machine to
answer the phone before the HP All-in-One does. The number of rings to answer for
the HP All-in-One should be greater than the number of rings to answer for the
answering machine.
For example, set your answering machine to a low number of rings and the HP All-in-
One to answer in the maximum number of rings. (The maximum number of rings
varies by country/region.) In this setup, the answering machine will answer the call
and the HP All-in-One will monitor the line. If the HP All-in-One detects fax tones, the
HP All-in-One will receive the fax. If the call is a voice call, the answering machine will
record the incoming message.
To set the number of rings before answering from the control panel
1.
Press
Setup
.
2.
Press
4
, and then press
2
.
Chapter 3
54
HP Officejet 6300 All-in-One series
Finish
setup
This selects
Basic Fax Setup
and then selects
Rings to Answer
.
3.
Enter the appropriate number of rings by using the keypad, or press or to
change the number of rings.
4.
Press
OK
to accept the setting.