Print fax confirmation reports
If you need printed confirmation that your faxes were successfully sent, follow these
instructions to enable fax confirmation before sending any faxes. Select either
On
Fax Send
or
Send & Receive
.
The default fax confirmation setting is
Off
. This means that the HP All-in-One will not
print a confirmation report for each fax sent or received. A confirmation message
indicating whether a fax was successfully sent appears briefly on the display after
each transaction.
To enable fax confirmation from the control panel
1.
Press
Setup
.
2.
Press
2
, and then press
3
.
This selects
Print Report
and then selects
Fax Confirmation
.
3.
Press to select one of the following, and then press
OK
.
Off
Does not print a fax confirmation report when you send and
receive faxes successfully. This is the default setting.
On Fax Send
Prints a fax confirmation report for every fax you send.
User Guide
77
Fax
On Fax Receive
Prints a fax confirmation report for every fax you receive.
Send &
Receive
Prints a fax confirmation report for every fax you send and
receive.
Tip
If you choose
On Fax Send
or
Send & Receive
, and scan your fax
to send from memory, you can include an image of the first page of the fax
on the
Fax Sent Confirmation
report. Press
Setup
, press
2
, and then
press
2
again. Select
On
from the
Image on Fax Send Report
menu.